wwstereo.com home       at Home       on the Road       or for your Business       contacting us     
Runco International
Super IDTV II SC-3050 Scan Converter
 overview       specifications       other runco products

Specifications & Technical Data

JacksRated Values
VIDEO 1 through VIDEO 5BNC InputInput Impedance: 75 Ohm 1.0 Vp-p
S input (VIDEO 1 and 2 only)Y: Input impedance: 75 Ohm 1.0 Vp-p
C: Input impedance: 75 Ohm .28 Vp-p
Audio input L and R (RCA type)*Input impedance: 22KOhm or greater 0.5 Vrms
MONITOR OUTBNC outputOutput impedance: 75Ohm 1.0 +- 0.1 Vp-p (with 75Ohm termination)
S outputY: Output impedance: 75Ohm 1.0 +- 0.1 Vp-p (with 75Ohm termination)
C: Output impedance: 75Ohm .28 +- 0.1 Vp-p (Burst level) (with 75Ohm termination)
Audio output L and R (RCA type)*Output Impedance: 1kOhm or less 0.5 +- 0.1 Vrms (with ATT 0 dB)
RBG InputD-SUB 15-pin, high densityR,G,B,H and V: Through out
Audio input L and R (RCA type)*Input impedance 22kOhm or greater 0.5 Vrms
RGB OutputBNC Output**R,G, and B: Output impedance of 75Ohm
0.7 +- Vp-p Note that the maximum deviation between R,G, and B is 0.05V
Note: From the blanking level to white peak (with 75Ohm termination)
HORIZONTAL and VERTICAL: High impedance 3.5 Vp-p (2.7 to 5.25 V)
H/V Output impedance of 75 Ohm 1.0 +- 0.3 Vp-p
Audio output Land R (RCA type)*High impedance 0.5 +- 0.1 Vrms (with ATT 0 dB)
EXT CONTROLD-SUB 15-pin, high densityTTL level
PC CONTROLD-SUB 15-pin, high densityTTL level
  • Output Resolution: 1050 lines horizontal, progressive scan 450 lines vertical
  • Noise Reduction: Approx. 4 dB in VIDEO NR mode 1 Approx. 8dB in VIDEO NR mode 2
  • Audio Frequency Response: 20Hz-20kHz +- 0.1 dB
  • Audio Signal to Noise Ratio: > 85 dB
  • Audio Total Harmonic Distortion: <0.002%
  • Power Supply: 120/240V AC, 50/60Hz 0.4A
  • Power Consumption: 48 Watts
  • Dimensions: 43.0W x 12.0H x 34.9D
    16 30/32 W x 4 23/32H x 13 25/32D (inch)
  • Weight: 5.7 kg/12.6lbs
  • Shipping Weight: 10kg/22lbs.
Supplied Accessories:
Remote control, two AA size batteries, power cord, Coaxial cable (RGB H/V 5 conductor BNC/BNC)

*When a phono pin plug is not connected to the right channel audio input (output) jack, the left channel audio input (output) jack functions as a monaural audio input (output) jack.
**When a signal is input via the RBG (THROUGH) connector, the signal is looped-through to out.

  • These specifications and contents are subject to change without notice.
  • Dimension indications of the scan converter unit do not include protrusions such as knobs and handles.